SV
EMT19-230AC Electromagnetic retiring cam, 100 % duty cycle
The electromagnetic retiring cam EMT19-W in level of protection IP54 is equipped with a considerable higher force and a longer travel in comparison to the version EMT17.
The assembly is made on the car roof. The adjusting range of the actual cam is extraordinary high, because the sliding rail can be adjusted, too. Furthermore the cam can be rearranged from left to right position.
- Particularly high force and large stroke
- Wide range of adjustment of the rail
- Assembly on the car roof
- All steel parts galvanized
- Quiet due to high absorption at switch on and switch off
- Very robust and precise
- Infinite variability of the cam
- Changeable from left to right hand position
-
Specification
Actuation force 90 N Connection Screw terminal and earthing bolt M4, cable gland PG9 Duty cycle ED 100 % Pull-in / holding current 0,7 / 0,7 A Ambient air temperature 0 - + 40 °C Stroke 45 mm Customary position Horizontal Protection class IP40 Weight 15 kg -
Description
The electromagnetic retiring cam EMT19-W in level of protection IP54 is equipped with a considerable higher force and a longer travel in comparison to the version EMT17.
The assembly is made on the car roof.
The adjusting range of the actual cam is extraordinary high, because the sliding rail can be adjusted, too.
Furthermore the cam can be rearranged from left to right position.- Particularly high force and large stroke
- Wide range of adjustment of the rail
- Assembly on the car roof
- All steel parts galvanized
- Quiet due to high absorption at switch on and switch off
- Very robust and precise
- Infinite variability of the cam
- Changeable from left hand position to right hand position