SV
LSM-BELT Sensor for OTIS Belts
LSM-Belt is designed according to a patented measuring principle that does no longer require any expensive elevator calibration by testing weights.
This belt sensor suits belts from 30 mm to 60 mm / 1 3/16 - 2 23/64 inch of width and can be applied straight away. Its excentric lever allows the belt sensor to be fitted to the belt within a few seconds.
It is equipped with a 0,8m mains cable.
-
Specification
Evaluation Unit Henning MSM12 Type of rope Belt Needs calibration No Rope diameter 30-60 mm Application range 0-500 kg Connection cable 0,8 m Maximum load 1000 kg Breaking load 2000 kg Length 230 mm Width 120 mm Height 82 mm Temperature range 0-70 °C -
Description
LSM-Belt is designed according to a patented measuring principle that does no longer require any expensive elevator calibration by testing weights.
This belt sensor suits belts from 30 mm to 60 mm / 1 3/16 - 2 23/64 inch of width and can be applied straight away. Its excentric lever allows the belt sensor to be fitted to the belt within a few seconds.
It is equipped with a 0,8m mains cable.